Abstract
Worldwide there are vast reserves of natural gas trapped in tight sandstone formation, and due to the low viscosity of natural gas, it can be easily recovered. To produce this huge amount of reserve from low permeability formation economically, hydraulic fracturing can be applied. Therefore, the objective of hydraulic fracturing for well stimulation is to increase well productivity by creating a highly conductive path (compared to reservoir permeability) a distance away from the wellbore into the formation.
The post-treatment performance provides a good indication of stimulation success, whereas, pressure transient (PTA) and production data analysis for hydraulically fractured vertical well remains the most applied method to determine the reservoir and fracture parameters. Therefore, this analysis is a key element for optimization of hydraulic fracturing process and forecasting well performance.
This article discuses the analysis of pressure and production data from hydraulically fractured vertical well in low permeability sandstone reservoir. Whereas, pressure transient analysis is used to evaluate the effective fracture parameters such as fracture half-length, fracture conductivity, and reservoir properties. Field example of application of production data analysis for vertical fractured well are presented.
The aim of this study is to evaluate the gas well productivity as a result of hydraulic fracturing treatments compared to the pre-fracturing productivity and to estimate the petrophysical properties of the gas well from MIT testing data. Moreover, a discussion of how significant the incrementing as productivity was achieved with a very high propped fracture treatment success rate is also presented. Furthermore, a view of how the correct design of fracture treatment scan enhance reservoir performance and the recovery rate is discussed in detail.