Abstract
Fe–Co–Al trimetal oxide (TMO) was prepared by the sol–gel route for the oxidation of phenol solution by catalytic wet peroxide oxidation (CWPO) method. The characteristic of Fe–Co–Al was carried out. The size of the catalyst was found to be between 1 and 5μm with good porosity which was confirmed using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N2 adsorption–desorption isotherms. The catalytic activity results showed almost complete oxidation of phenol up to 1000mg/L. The oxidation process and the products formed were confirmed using various instrumental analyses. The TMO catalyst could be reused even after three cycles very effectively.
[Display omitted]
► Wet peroxide oxidation of phenol using TMO catalyst. ► Complete oxidation of phenol reduction was observed ► TMO catalyst can withstand even high temperatures. ► The process works without sludge production and low electrical energy input. ► The catalyst was active even after 3cycles in this study.