Abstract
The current study aims to investigate the radiation shielding properties of mortar samples with Fe2O3 nanoparticles for radiation protection applications. For the reference mortar (free Fe2O3 nanoparticles) and the mortar with different concentrations of Fe2O3 nanoparticles, we experimentally measured the transmission factor (I/I0) for four different thicknesses of the prepared mortar. The I/I-0 results indicated that the transmission of the photons through the mortars decreases with increases in the mortar's thickness. The lowest TF was found for the mortar coded as MI-25 (contains 25 wt.% of Fe2O3 nanoparticles), which gives an indication about the development in the attenuation ability of the prepared mortar samples due to the addition of Fe2O3. Similarly, the linear attenuation coefficient (LAC) results showed an increasing trend with the addition of Fe2O3 nanoparticles for the four tested energies. These results confirm that increasing the ratio of Fe2O3 nanoparticles can lead to a remarkable improvement in the gamma ray shielding. We reported the half value layer (HVL) and we found that the HVL for the reference mortar at 0.06 MeV is 1.223 cm, while it changed from 1.19 to 1.074 cm for the mortar with 5 and 25 wt.% of Fe2O3 nanoparticles. The HVL results demonstrated that increasing the ratio of Fe2O3 nanoparticles can lead to a notable reduction in the HVL. The tenth value layer results proved that we can develop new mortars for radiation shielding applications by introducing more concentrations of Fe2O3 nanoparticles.