Abstract
The control over the amount of psychoactive THC (Delta-9-tetrahydrocannabinol) in commercial cannabidiol (CBD) products has to be strict. A fast and simple semiquantitative Ag(I)-impregnated paper spray mass spectrometric method for differentiating between THC and CBD, which show no difference in standard single-stage or tandem MS, was established. Because of a different binding affinity to Ag(I) ions, quasi-molecular Ag(I) adducts [THC + Ag](+) and [CBD + Ag](+) at m/z 421 and 423 give different fragmentation patterns. The product ions at m/z 313 for THC and m/z 353 and 355 for CBD can be used to distinguish THC and CBD and to determine their ratio. Quantification of THC/CBD ratios in commercial CBD oils was accomplished with a low matrix effect (-2.2 +/- 0.4% for THC and -2.0 +/- 0.3% for CBD). After simple methanol extraction (recovery of 87.3 +/- 1.2% for THC and 92.3 +/- 1.4% for CBD), Ag(I)-impregnated paper spray analysis was employed to determine this ratio. A single run can be completed in a few minutes. This method was benchmarked against the UHPLC-UV method. Ag(I)- impregnated paper spray MS had the same working range (THC/CBD = 0.001-1) as UHPLC-UV analysis (R-2 = 0.9896 and R-2 = 0.9998, respectively), as well as comparable accuracy (-2.7 to 14%) and precision (RSD 1.7-11%). The method was further validated by the analysis of 10 commercial oils by Ag(I)-impregnated paper spray MS and UHPLC-UV analysis. Based on the determined relative concentration ratios of THC/CBD and the declared CBD concentration, 6 out of 10 CBD oils appear to contain more THC than the Dutch legal limit of 0.05%.