Abstract
The present investigation aimed to evaluate the efficiency of coffee silverskin (CS), CS ash (CSA) and nanoparticles of CS (NCS) in regeneration the quality of used frying palm oil. The adsorbents were mixed individually with used frying palm oil at level 4% (w/v) for 60 min. The properties of CS, CSA and NCS adsorbents were studied using (SEM) scanning electron microscopy technique. Some of physicochemical characteristics of used frying palm oil (UFPO) and UFPO treated with adsorbents were determined. The results showed that the CS ash particles composed of irregular spherical and semispherical grains with deep cavities. The size of particles of CS ash ranged in diameter from 1.1 to 1.7 mu m. The morphology of NCS consisted of cluster-type spherical nanoparticles and flakes. The particle size of NCS varies from 0.9 to 1.7 mu m. Purification treatments caused marked (p < 0.05) increases in the quality parameters of treated oil compared to untreated oil. The treatment of UFPO with 4% of adsorbents caused significant reductions in the content of free fatty acids ranged from 51.2 to 65.0%. The lowest level of peroxide (2.1 meq/kg) was recorded for UFPO treated with 4% of NCS. The highest reductions (72.8; 70.0%) in p-anisidine value were observed in UFPO treated with 4% of CSA and NCS, respectively. Treatment of UFPO with 4% of CS, CSA and NCS significantly lowered the polar content from 13.9% to 6.3, 4.8 and 3.9%, respectively. The results also indicate that CSA and NCS have nearly the same adsorption efficiency in lowering polymer content of UFPO. Filtration treatment of UFPO with 4% of CS, CSA and NCS markedly lowered the viscosity and colour values of treated UFPO.