Abstract
The influence of pigment shapes and pigment blends on the surface energy was investigated and compared with the surface chemistry of pigmented latex coatings. The coatings were made of different volume ratios of two pigments: plate-like kaolin clay pigment and prismatic precipitated calcium carbonate (PCC) pigment. These were mixed together with carboxylated styrene–butadiene–acrylonitrile latex (SBA), and applied over nonabsorbent substrates as well as absorbent substrates. The composition of the surface of the coatings was investigated by X-ray photoelectron spectroscopy (XPS). Two approaches were used to estimate the total surface energy and the components of the coatings: a conventional approach—“the Kaelble approach”—and a more modern approach—“the van Oss approach.” Pigment blends with different shapes and increments caused a change in the surface chemistry and the surface energy of the latex coatings. As the prismatic PCC pigment particles increased in the kaolin/SBA coating system, the SBA latex content at the coating surface increased and the total surface energy of the coating decreased. This is valid for both nonabsorbent as well as absorbent substrates. It was found that there was a strong correlation between the surface energy and the surface composition. The surface energy of the coatings estimated by the Van Oss approach was always lower than that estimated by the Kaelble approach. Colloidal interactions between pigment–pigment and/or pigment–binder were thought to play an essential role in determining the final coating surface energy and its components. Changes in the surface latex content and the surface energy due to the different pigment blends investigated were found to fit straight-line equations.