Abstract
The main focus of the study was to witness the effects of chicken waste-based biodiesel blends along with constant hydrogen injection in a modified diesel engine. Furthermore, the nanoparticle multiwall carbon nanotubes (MWCNT) effects on the engine efficiency were also examined. A series of tests was conducted in the single cylinder, water cooled engine fuelled with diesel, CB100N, CB10N, CB30N, and CB50N. Throughout the entire run, constant hydrogen injection of 5 LPM has been maintained. The parameters such as brake thermal efficiency, brake specific fuel consumption, heat release rate and the emissions of different pollutants were determined for a variety of engine speeds. ASTM standards were applied to measure the viscosity, density and calorific value. From the reported findings, it was clear that the addition of the chicken waste biodiesel could be a sustainable substitute for the existing fossil fuels. Although the emission of the pollutants was dropped significantly, there was a massive drop in the BTE values. To compensate such shortage of power, the biodiesel was dispersed with MWCNT at the concentration of 80 ppm. Compared to the regular biodiesel, MWCNT inclusion increased the BTE by 14%. Further, the consumption of the fuel was also reduced marginally. Considering the pollutants, the catalytic activity of the MWCNT reduced the emissions of CO, NOx, and HC at various engine speeds. Besides, 10% reduction in NOx had been reported at lower engine speeds and was reduced to 8% at higher speed regimes. Compiling all together, increasing the concentration of the biodiesel blends obviously reduced the performance values and however, there was a great advantage in terms of the emission magnitudes irrespective of the engine operating conditions.
•Chicken fat waste was examined as the potential replacement for fossil fuel.•Role of hydrogen with nanoparticles were also observed.•MWCNT inclusion increased the BTE by 14%.•10% reduction in NOx had been reported at lower engine speeds.