Abstract
Bismuth sulfide (Bi2S3) nanorods have been prepared using a simple and low-cost reflux method. This method is easy to handle and opens up a way to manufacture photocatalytic pigment at a low cost. The Bi2S3 catalyst was subjected to X-ray diffraction (XRD), UV–Visible spectroscopy (UV–Vis), scanning electron microscope, high-resolution transmission electron microscopy, FT-IR spectroscopy, thermogravimetric analysis (TG/DTA), and X-ray photoelectron spectroscopy. The structures of the Bi2S3 nanorod have been investigated and were seen to be orthorhombic. The electron microscopic observations showed that surfactants greatly affect the morphologies of the as-prepared Bi2S3 samples. The XRD and TEM results confirmed that the Bi2S3 nanorods have a high surface area and are good crystallinity. TEM measurements revealed that the average breadth and length is 75 nm and 385 nm for Bi2S3 nanorods prepared using NaOH. The uniform one-dimensional Bi2S3 nanorods are due to the presence of NaOH which controls the nucleation and growth process of Bi2S3 nanorods. The photocatalytic activity of the Bi2S3 nanocrystallites has been estimated by the degradation of methylene blue (MB) under the irradiation of halogen light. It was noted that the absorption peak corresponding to MB reduced indicating the photocatalytic nature of the sample. In these conditions, the maximum degradation of the dye was achieved within 140 min for KOH added Bi2S3 samples and the photodegradation efficiency is 87.98%. A possible photocatalytic reaction mechanism of the Bi2S3 samples has also been proposed.