Abstract
•Ultrasonic temperature sensor with frequency output.•Fast response to temperature changes along the complete ultrasound pathway.•Data fusion is used to eliminate ambiguity related to hysteresis in piezoelectric transducers.•Tenfold increase in the temperature resolution comparing to the reference sensor.
Ultrasonic temperature measurement allows for responsive measurements across an entire ultrasonic pathway, unlike most conventional temperature sensors that respond to the temperature at the point of their placement only after a notable response time. The high cost of required ultrasonic instrumentation can be reduced substantially by using ultrasonic oscillating temperature sensors (UOTS) consisting of inexpensive narrowband piezo transducers and driving electronics. An UOTS produces sustained oscillations at a frequency that relates to the temperature of the medium between the transducers. The existence of thermal hysteresis in UOTS readings, observed experimentally and apparently related to the fundamental properties of piezoelectric materials, makes conversion of the output frequency readings to the temperature values ambiguous. This makes it complicated to calibrate and use UOTS on their own. In the reported experiment (heating, then naturally cooling of a water vessel equipped with both UOTS and conventional sensors), this hysteresis was solved by fusing UOTS data with conventional temperature sensor readings. As the result, the combination of one UOTS plus one conventional reference sensor allowed improving both the temperature resolution and responsiveness of the latter and ambiguity of the readings of the former. Data fusion effectively led to calibrating the UOTS at every change of the conventional sensor's reading, removing any concerns related to the thermal expansion/contraction of the ultrasonic pathway itself and/or hysteresis of piezoelectric transducers.