Abstract
Glass fiber-reinforced polymer (GFRP) bars are emerging as a potential replacement for steel rebars due to their vulnerability to corrosion. However, the shear behavior of GFRP bars is not well established, especially in functionally graded self-compacting concrete (SCC) deep beams reinforced with hybrid rebars (GFRP and steel). This article experimentally explores the behavior of functionally graded high-strength SCC deep beams having a hybrid of steel and GFRP bars as tension reinforcement. A total of fourteen deep beams were prepared with varying reinforcement ratios and steel fiber volume fractions. There were three groups of deep beams: (i) plain SCC (i.e., no fibers) beams, (ii) fiber-reinforced SCC (FRSCC) beams having 0.6 % and 1.2 % steel fibers, and (iii) functionally graded deep beams. The functional grading was achieved by casting beams in two layers, with the first layer of lower two-thirds depth having steel fibers and the second layer without fibers. The beams were shear deficient and tested in flexure. The shear resistance of functionally graded deep beams was compared with beams having fibers in full depth and without fibers. The test results reveal the significance of the hybrid system of rebars, which is found to effectively improve the structural capacity of concrete beams and increase the load required to initiate cracking. In addition, the mixing of fibers in concrete enhanced the deep beam shear capacity by 15-23 % for 0.6 % fibers and 37-39 % for 1.2 % fibers. The increase in the shear resistance of concrete deep beams was not influenced by the use of hybrid rebars compared to using GFRP bars only. A model is developed for assessing the shear resistance of functionally graded fiber-reinforced concrete deep beams by incorporating the dowel action of hybrid longitudinal reinforcing bars. The study indicates that the dowel action provided by GFRP bars is comparable to the steel bars of the same area.