Abstract
For the fast uptake into industrial applications, the further development of robust methods of nanomaterials, which are inexpensive and simultaneously technologically feasible, is one of the major key factors. A newly introduced atmospheric pulsed laser deposition method, based on a flowing gas approach, was used for plasmonic metal nanoparticle (NP) film of silver. Contrary to vacuum, in this method, the ambient air restricts expansion of the ablation plume within 1 to 3 mm above the target surface. These sets constrain on the formation of NP film close to the ablation spot. For deposition on a widely spaced surface, ablation material was entrained in a flow of argon, supplied at similar to 32 ms(-1), and effectively delivered to the substrate at similar to 20 ms(-1). The films produced were crystalline and particulate in nature, showing spectral plasmonic feature of surface plasmon resonance in the visible region. The film was directly tested in surface-enhanced Raman spectroscopy for chemical detection of crystal violet; the film with large particulates and aggregated crystallites was well-performed, showing enhanced Raman signals and detection sensitivity. Certainly, flowing gas atmospheric pulsed laser deposition seems a fast alternative to vacuum-pulsed laser deposition but needs further investigations to bring it in the industry for applications in sensor, catalysis, solar cell, and coating technology.