Abstract
Porous high-pressure membranes have been widely used for saline water desalination. However, fouling (concentration polarization) extensively reduces permeate flux in reverse osmosis (RO) and/or nanofiltration (NF) modules. Fouling arises from pore blocking, organic adsorption, cake formation, inorganic or biological precipitation reducing water flux. Herein, we investigated the effect of feed water with various NaCl concentrations on fouling of RO and/or NF and the permeate water flux. A parabolic (or diffusion) partial differential equation (PDE) was used to model salt concentration profile or gradient inside the membrane. Subsequently, the numerical PDE equation, solved by the forward finite difference (FFD) explicit method, estimated flux decline rates resulted from NaCl fouling. It was found that salt accumulation occurs at the feed-side with a noticeable decrease in flux as fouling increases. Previous works reported similar findings as those identified from our analysis: (1) fouling increases with feed concentration and surface roughness, (2) fouling becomes intensified with higher pressure and flux, (3) fouling from long operation times can reduce flux by 65% within 24 h, (4) NaCl fouling can decrease flux rates by 70% (6722 LMH) for brackish water with an initial concentration of 10000 ppm, and (5) reversible organic fouling may be avoided from lowering flux rates below the membrane critical flux. Results showed fouled RO modules would decrease flux rates from the increased surface polarization, where reverse flow (negative flux) was estimated for feed-side accumulations >10000 ppm for waters with an initial NaCl concentration of 10000 ppm and average diffusivity of 1.3x10(-6) cm(2)/s. (C) 2021 The Authors. Published by IASE.