Abstract
Soil reinforcement using synthetic fibers is a proven technique for enhancing engineering properties to meet the requirements of subgrade materials for pavement projects. The safe and economical design of fiber-reinforced pavement layers requires better insights into their unsaturated behavior. The soil-water characteristic curve (SWCC) is a measure of the water content inside soil pores at a given suction and is considered an essential property to better understand or predict the behavior of unsaturated fiber-reinforced soils. This paper centers on investigating the soil-water characteristic curves for typical expansive clay reinforced with two different types of polypropylene fibers having different surface morphological properties. The effect of an increase in the fiber dosage (0.2% and 0.6% by dry weight of soil) and fiber lengths (6 and 12 mm) on the resultant SWCC patterns is investigated. The addition of lime is considered to enhance the bonding between clay particles and fiber elements to ensure better friction mobilization levels. SWCCs were determined for all experimental mixtures using a combination of axis translation and filter paper techniques that cover the entire matric suction range during measurements. Volume changes undergone during suction measurements have been duly highlighted and discussed. Furthermore, the one-dimensional deformation (swelling/consolidation) characteristics of these lime-blended fiber-reinforced mixtures at different levels of initial matric suction are studied, and the correlations between initial matric suction with both compression index (Cc) and swell index (Cs) are established. The results indicate a significant change in the shape of the SWCC for lime-blended fiber-reinforced mixtures compared with the shape of the SWCC for natural clay. The contribution of fiber inclination to altering the shape of the SWCC curve is observed as slight regardless of the type, length, and dosage of fiber. Compression and swell indices for tested mixtures increased proportionately with an increase in initial matric suction levels. Doubling the length of the fiber also induced an increase in the compression index. Under no stress conditions did both fiber type and fiber length have a marginal effect on the swell potential and SWCCs. 2020 American Society of Civil Engineers.