Abstract
We prepared mesoporous alpha-Fe2O3/FTO electrodes by a simple anodic precipitation and annealing method. The classic problem is that when annealed in air at >500 degrees C, the individual particle size increases from approximate to 20 nm to 40-60 nm. This grain growth is highly detrimental for the water splitting efficiency. In the present work we show that grain coarsening can efficiently be prevented by a two-step annealing method in Ar, leading to photocurrent densities for such electrodes (obtained in 1 M KOH solution) of up to 2.6 mA cm(-2) at 1.6 V vs. RHE under AM 1.5 100 mW cm(-2) illumination, which is significantly higher than 1.5 mA cm(-2) for conventionally annealed samples.