Abstract
A Stable and highly reliable DC link voltage represents an important factor for efficient power transfer in high voltage direct current (HVDC) networks. In this framework, this paper investigates the control and stability analysis of voltage source converter (VSC) for DC link voltage regulation. To separately achieve the independent active and reactive power control, the system voltages and currents are represented in the synchronous reference frame. In order to optimally design the parameters of proportional-integral (PI) controller, the inner and outer loops' transfer functions are thoroughly derived/developed. In addition,/moreover, in order to attain satisfactory/certain system performance, modulus optimum, symmetrical optimum pole placement control approaches are studied and implemented for the purpose of tuning the voltage/current controller gain parameters. In particular for the symmetrical optimum control method, the gain parameters of the DC-bus voltage are determined under different values of network impedance. Furthermore, the impact/influence of changing gain parameters on the DC-link voltage and poles/zeros movement are investigated. MATLAB/Simulink model is built and simulation studies are carried out to verify the introduced concepts. (C) 2021 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Ain Shams University.