Abstract
The effect of nanosized ZnFe2O4 addition on the physical properties of polycrystalline SmBa2Cu3O7-delta superconductor was studied. Superconducting samples of the type (ZnFe2O4)(x)SmBa2Cu3O7-delta, x = 0.00, 0.01, 0.02, 0.04, 0.06, 0.08, 0.10, 0.15 and 0.20 wt% were prepared by the solid-state reaction method. The characterization and superconductivity investigation were carried out using X-ray powder diffraction, XRD, scanning electron microscope, SEM, energy-dispersive X-ray, EDX, dc electrical resistivity and transport critical current density at 77 K. Improvements in the volume fraction, superconducting transition temperature, T-c, and transport critical current density, J(c), were observed as x increased from 0.00 up to 0.08 wt% and then they decreased with further increase in nanosized ZnFe2O4 addition. The Vickers microhardness number, H-v, and elastic parameters have been measured at room temperature. The ultrasonic pulse-echo technique at 4 MHz was used to determine the elastic parameters. H-v and the elastic parameters were observed to increase with increasing x. The enhancement of the elastic parameters may be due to the hindrance of dislocation motion with nanosized ZnFe2O4 addition. Moreover, Debye temperatures (theta(D)) were calculated and it was found that their values increased with increasing nanosized ZnFe2O4 addition. The elastic parameters of the samples were computed and corrected to zero porosity using different models. Finally, the relationship between Young's modulus and H-v was estimated for different models.