Abstract
The surface ion-imprinted poly(ethylene terephthalate)-thiosemicarbazide modified chelating fibers (Hg-PET-TSC) was prepared using Hg(II) as a template and formaldehyde as a cross-linker and showed higher adsorption capacity and selectivity for the Hg(II) ions compared with the non-imprinted fibers (NI-PET-TSC) without a template. The results showed that the adsorption of Hg(II) on the fibers was affected by the initial pH value, the initial Hg(II) concentration, as well as the temperature. Both kinetics and thermodynamic parameters of the removal process were evaluated and the obtained results indicated a spontaneous exothermic adsorption process that fit with the second-order kinetic model. Equilibrium experiments were fitted in both Langmuir and Freundlich adsorption isotherms and fits well with the Langmuir isotherm equation for the monolayer adsorption process. The maximum adsorption capacity values for Hg-PET-TSC and NI-PET-TSC were 137.13 mg/g and 77.51 mg/g, respectively. The selectivity coefficient of Hg(II) ions and other metal ions on Hg-PET-TSC indicated an overall preference for Hg(II) ions. Desorption studies revealed that HCI or EDTA solutions were the best eluents for the regeneration of the Hg-PET-TSC ion-imprinted chelating fibers. (C) 2013 Elsevier B.V. All rights reserved.