Abstract
Background: Kraton/polyaniline ionomer is synthesized and further characterized by electrochemical studies to check the redox properties of the material. Ion exchange capacity, proton conductivity, and selectivity of the synthesized membrane were determined. And found that the membrane was selective for Cu (II) ions.
Methods: The dry Kraton membranes were weighed and kept in 25 mL of 10 % prepared aniline solution in a conical flask for 5, 10, 15, and 20 minutes below 10 0C for socking. The prepared solution of 30 mL of 0.1 M potassium peroxydisulfate was added in a conical flask at constant stirring below 10 degrees C for half an hour. Finally, the aluminum foil-covered conical flask was kept in the refrigerator for 24 h and modified Kraton membranes were weighed again before carrying out further studies.
Results: The membrane was characterized by some physicochemical methods like SEM, TGA, T-IR, IEC, proton conductivity and selectivity sorption studies. An ionomeric membrane of Kraton polymer was developed as reported earlier. Kraton membrane showed the IEC of 1.9 meg.g(-1). The FTIR spectrum of Kraton/PANI film reveals that weight loss up to 400 degrees C may be found because of the thermal degradation of composite substances.
Conclusion: Ion-selective potentiometric was carried out using the self-prepared ion-selective membrane electrode. The membrane was prepared by solution casting method. The membrane was characterized by some physicochemical methods like SEM, TGA, T-IR, IEC, proton conductivity and selectivity sorption studies. On the basis of selectivity studies, the composite material was found selective for Cu (II) ion. A copper ISME was successfully fabricated using the solution casting method. The ISME possessed good selectivity, linearity, working pH range, and response time which was also used as an indicator electrode for the titration of copper using EDTA.