Abstract
Herein a good adherent film of PMMA doped with the various ratio of BG-dye deposited on optically flat FTO-substrates by using a well-controlled spin coating process. The average crystallite size and microstrain were determined by X-ray diffraction pattern analysis and were found to be 21.7219 nm and 0.0016, respectively, with a significant change with the amount of BG-dye doping in the matrix of PMMA film. Both linear and nonlinear optical characteristics, as well as their related parameters, were measured using a UV–Vis–NIR spectrophotometer. As a result of doping BG-dye molecules into the host PMMA matrix system, optical absorption studies revealed significant changes in optical characteristics. BG-dye doped PMMA film revealed impressive absorption bands in the range of 350–750 nm, depending on the degree of doping of BG-dye into the PMMA film. Another distinguished property is the attenuation of the complete absorption in the range of 552–688 nm and observed as a cut-off-absorbance. The point of the art of this contribution is the various applications for optical limitation systems like Cut-off filters and other related optical devices due to the remarkable optical features. The BG-dye doping influenced all optical metrics, including the absorption band, absorption edge, and direct and/or indirect energy band gap. The direct energy gap's first region is in the range of 1.77–1.97 eV, whereas the second is in the range of 2.68–2.82 eV, and the third is in the range of 3.67–4.09 eV. The indirectly allowed transitions are divided into two regions, the first of which is in the 1.74–1.82 eV range and the second of which is in the 3.69–3.98 eV range. The appearance of extra energy levels is confirmed by fluctuations in the optical band gap, which are aided by the influence of dopant concentration of BG-dye dopant wt.%. The ratio of BG-dye into the PMMA film is promising for the optical respective of the green light for the cut-off filter as well as optoelectronic device applications.