Abstract
Thermal Energy Storage (TES) is a key feature in the sizing of thermal systems and energy management. The Phase Change Material (PCM) can store a huge amount of heat in the form of latent heat. However, a good design of the TES unit is required to absorb thermal energy and charge quickly. In the present study, a combination of optimum fin design and nanoadditives are used to design a shell and tube shape TES unit. The Taguchi optimization method is employed to maximize the melting rate by optimizing the arrangement shape of fins and the type and the volume fractions of nanoparticles. The results showed that long fins should be mounted at the bottom and short fins at the top, so that the PCM melts down at the bottom quickly, and consequently, a natural convection circulation occurs at the bottom and advances in the solid PCM. The short fins at the top allow a good natural convection circulation at the top. An increase in the volume fraction of nanoparticles increases the melting rate. An optimum design shows a 20% more melting rate compared to a poor design.