Abstract
This study reports on the tribological behavior of Indian rail track and wheel materials under different contaminants. A pin-on-disc tribometer was selected for the experimental analysis in ambient conditions (temperature of 24.9 degrees C and relative humidity of 66%). Sand, mist, leaves, and grease were the contaminants used in this investigation. The railway track was used to make the pin, and the wheel was used to make the disc. The acquired results were analyzed using frictional force and wear depth as a function of time as the variables. These pollutant effects were compared to no-contaminant conditions. It was observed that the sand increased the friction force and wear depth, whereas oil decreased friction and wear. Mist and leaves also reduced friction and wear. The effect of leaves was higher than the mist. The effect of load on various contaminants was also investigated. The results showed that as the load increased, the friction force and wear also increased for all contaminants. The results of this study can help in understanding the wear phenomenon of wheels and rail tracks in different parts of India.