Abstract
In wireless digital communications, amplitude-shift keying (ASK) and frequency-shift keying (FSK) modules are often used and radio frequency (RF), communication synchronization, and noise problems affect the performance very much. In particular, the sending of byte-type data called synchronous and preamble before sending data in intermodule communication increases the sent data and decreases the speed. Also, the microcontroller at the output of the RF receiver module continuously listens to the RF noise and analyzes incoming data, but this increases the processing load of the microcontroller. Moreover, it reduces the speed of performing other operations. In this study, a transparent RF transmitter and receiver have been investigated, and methods for increasing the communication performance of the modules have been proposed and performed. Two of the proposed methods prevented the continuous listening of the microprocessor in the RF receiver structure so that the microprocessor can be used with other processes. In other methods, the compression of the data size was achieved because the transmission of a series of data in RF communication systems was limited to a certain extent. In the last section of the study, since the RF modules have failed to transmit the data due to corruption in the extended data dimensions, the bit carrier control security code has been created for the data series and more healthy communication has been performed.