Abstract
Auxiliary ventilation is performed by carrying intake or return air in ducts. The complete elimination of air leakage from or into the ducting system is impossible due to duct quality and numerous joints in ducting system. The auxiliary ventilation systems for long drivages often require the use of multiple fans. Fans are installed in series and separated from each other in fixed or variable lengths. There are many methods proposed for the analysis air flow problems in leaky ducts. Due to the lengthy calculations, computers are often needed to conduct the analyses. In this study, a method known as “series–parallel combination of the duct and leakage path” has been introduced and a computer program has been developed based on this method.
In order to design the conditions of an auxiliary ventilated drivage, in situ measurement have been made in Western Lignite Enterprises (GLI)
OMERLER underground coal mine (Turkey) and the related data necessary for this study was collected. The presently developed program was tested using these data, and it was found that the measured and calculated values are quite close.
The effective operational parameters governing auxiliary ventilation have been investigated and the effects of these variables on the volume rate of air flow reaching long drivage face have been examined by using linear regression analysis. Finally, it was concluded that the increase of duct diameter has prime importance in achieving the adequate air flow to the face and that for the auxiliary fans considered in this study the selection of fan does not greatly affect the volume rate reaching the face in a long duct line.