Abstract
The preliminary screening tests on the preconcentration of lanthanum(III), aluminium(III), molybdenum(VI), gallium(III) and tungsten(VI) thiocyanate complexes in aqueous media by unloaded foam indicated a reasonable percentage of metal ions were retained on the foam. The influence of various parameters affecting the retention of these complex species from the aqueous media by the foam were critically studied and the possible mechanisms of the sorption of the compounds were suggested. However, owing to the complex chemical nature of the polyether—polyurethane foam, several mechanisms may be involved simultaneously. Attempts for the quantitative retention and recovery of the tested complexes by the foam columns were also made and satisfactory results were obtained. The height equivalent to theoretical plates (HETP) of the foam columns were calculated from the chromatograms and break through capacity curve and were found in the range 1.8–2.3 mm at flow rates up to 15 cm
3/min. The proposed foam column method has been successfully used for the separation of a series of complex mixtures of the tested metal thiocyanate complexes in aqueous media. The membrane properties of the foam sorbents offer unique advantages over conventional bulk type granular sorbents in rapid, versatile effective separations and preconcentrations of different complexes from fluid samples.