Abstract
With the gradual reduction of fossil fuels, it is essential to find alternative renewable sources of energy. It is important to take advantage of substitutes that are less expensive and more efficient in energy production. Photovoltaic concentrators (CPVs) are effective methods through which solar energy can be maximized resulting in more conversion into electrical power. V-trough concentrators are the simplest types of low-CPV in terms of design as it is limited to the use of two plane mirrors with a flat photovoltaic (PV) plate. A consequence of concentrating more solar radiation on a PV panel is an increase in its temperature that may decrease its efficiency. In this work, the thermal profile of the PV plate in a V-trough system will be determined when this system is placed in different geographical locations in Saudi Arabia. The simulation is conducted using COMSOL Multiphysics software with a ray optics package integrated with a heat transfer routine. The 21st of June was chosen to conduct the simulation as it coincides with the summer solstice. The employment of wind as a cooling method for V-troughs was investigated in this work. It was found that with the increase in wind speed, the PV panel temperature dropped significantly below its optimum operating temperature. However, due to the mirrors’ attachment to the PV panel, the temperature distribution on the surface of the panel was nonuniform. The temperature gradient on the PV surface was reduced with the increase of wind speed but not significantly. Reducing the size of the mirrors resulted in a partial coverage of solar radiation on the PV surface which helped in reducing the temperature gradient but did not eliminate it. This work can assist in testing numerous cooling models to optimize the use of V-troughs and increase its efficiency especially in locations having high ambient temperatures.