Abstract
•Performance of power plant with molten salt cavity receiver is assessed.•A method has been used to optimize the plant solar multiple, capacity factor and LEC.•Comparison of the simulated results to those of PS20 has shown good agreement.•Higher fossil fuel fraction reduces the LEC and increases the capacity factor.•Highland and Sahara regions are suitable for CRS plants deployment.
Of all Concentrating Solar Power (CSP) technologies available today, the molten salt solar power plant appears to be the most important option for providing a major share of the clean and renewable electricity needed in the future. In the present paper, a technical and economic analysis for the implementation of a probable molten salt cavity receiver thermal power plant in Algeria has been carried out. In order to do so, we have investigated the effect of solar field size, storage capacity factor, solar radiation intensity, hybridization and power plant capacity on the thermal efficiency and electricity cost of the selected plant. The system advisor model has been used to perform the technical performance and the economic assessment for different locations (coastal, highland and Sahara regions) in Algeria. Taking into account various factors, a method has been applied to optimize the solar multiple and the capacity factor of the plant, to get a trade-off between the incremental investment costs of the heliostat field and the thermal energy storage. The analysis has shown that the use of higher fossil fuel fraction significantly reduces the levelized electricity cost (LEC) and sensibly increases the capacity factor (CF). The present study indicates that hybrid molten salt solar tower power technology is very promising. The CF and the LEC have been found to be respectively of the order of 71% and 0.35$/kWe. For solar-only power plants, these parameters are respectively about 27% and 0.63$/kWe. Therefore, hybrid central receiver systems are really attractive solutions for rapid deployment of CSP technology in Algeria.