Abstract
Green hydrogen production is one of the most desirable sustainable goals of the United Nations. Thus, for that purpose, we developed hematite (alpha- Fe2O3 ), an n-type semiconductor, a desirable candidate for photoelectrochemical (PEC) water splitting, enabling hydrogen evolution. High recombination losses, low efficiency, and large-scale production hinder its potential. To address these issues, we have fabricated optimized bare and cadmium oxide (CdO)-decorated hematite thin film nanorod arrays using a throughput radio frequency (RF) sputtering with efficient water splitting behavior. To the best of our knowledge, no work has been done so far on the synthesis of CdO/alpha-Fe2O3 via RF sputtering for PEC application. Bare alpha- Fe2O3 samples, with a morphology of vertically aligned nanorods, were fabricated with optimized parameters such as as-deposited 70 nm of Fe, an angle of deposition of 70 , and an annealing temperature of 600 (& DEG;C), which showed a photocurrent density of 0.38 mA/cm2 at 1.65 V vs reversible hydrogen electrode (RHE). Characterizations depicted that this unique morphology with high crystallinity directly enhanced the performance of hematite photoanodes. Further, deposition of 30 nm of cadmium (CdO) on the alpha-Fe2O3 nanorods produced a corn like morphology with CdO nanoparticles (& SIM;2 nm), resulting in 4-times enhancement of the PEC performance (1.2 mA/cm2 at 1.65 V vs RHE). CdO acted as a co-catalyst, responsible for satisfactory suppression of recombination and facilitating the hole transfer, directly enhancing the overall photocurrent density. This photoanode showed an extremely stable behavior over a period of 26 h when kept under constant illumination. Furthermore, the CdO-modified photoanode showed a better dye degradation (98% in 40 min) than the bare hematite (60% in 40 min), proving to be an efficient photoanode.